Tips DVR Stand Alone H 264 Black Screen

Hello let’s approach this subject which by the way is very controversial and treated by other CCTV Forum, but for those who have a little knowledge in electronics and notion of setting up a DVR Stand Alone recording device will understand and get solve the problem.

Tips DVR Stand Alone H 264 Black Screen

Tips DVR Stand Alone H 264 Black Screen

Well before we pass any kind of tips let’s talk about problems we already caught on some specific DVR brands such as Intelbras DVR usually present this problem, let’s see then how we should act with Intelbras brand DVRs.

Tips DVR Stand Alone Intelbras H 264 Black Screen – Intelbras DVRs depending on the model will have a high resolution this is generally not compatible with the monitor so stay tuned.

Tips DVR Stand Alone H 264 Black Screen

Second Tip – Take care when configuring the HDMI (Read meaning of HDMI in Abbreviationfinder), be aware of the resolution of your monitor because if you set the DVR to a higher resolution than your monitor supports it will not display anything and get the screen black.

Well, in most cases of the Intelbras DVRs this is what happens our tip is to look for the analog output to configure the resolution before connecting to the monitor you want.

Tips DVR Stand Alone H 264 Black Screen 2

Let’s talk now about the DVR Stand Alone at all, when this type of problem happens can be set up wrong resolution we recommend testing the video port to see if it is not burned, has some brand of DVR that work with a reset button on the front panel DVR device so stay tuned can help you solve the problem.

Tips DVR Stand Alone H 264 Black Screen 3

Tip to solve the black screen problem – After testing the video output, also test the monitor and it does not cost anything to check if it is in the correct input, done so check the connector soldering on the DVR Stand Alone board.